Example: sparker sources
We design, manufacture and deliver geological prospecting and exploration equipment and software
We design, manufacture and deliver geological prospecting and exploration equipment and software

We provide many options on delivery of our goods.
Please, contact us,
so we could choose together the best one for you!

RMT-C system


on request
Item ID: rmt-k


The product was successfully added to basket

Radiomagnetotelluric sounding with a controlled source (CSRMT) is used in outlands where it is hard to get enough signals of radio stations in 10-1000 kHz frequencies range. The use of controlled source enables to lower frequencies minimum and reach the depths of investigation of 150-200 m, compared to 50m with RMT system. Graphs of resistivity and phase of the impedance distribution are shown as a result of measurements.

CSRMT is used:

  • To perform rapid geological investigations,
  • To search for mineral deposits,
  • Hydrogeological investigations,
  • Engineering investigations,
  • Ecological investigations.

The main features of the system are:

  • Possibility to record time sequences or magnetic and electric fields’ spectrograms;
  • Fast data quality control;
  • Possibility to save observed data to built-in memory or external PC.

Measuring the potential on 3-4 main frequencies of the source in 1-150 kHz range and their subfrequencies (7-9 of each frequency) allows to get detailed information about potential distribution on depths starting from 1-2 m up to 150-200 m. About 50 RMT-C points could be done per day, what is approximately 5 times faster than performing VES to similar depths.

Recorder M-K5-SM25:
Number of synchronous channels 5
ADC 16 bits
Range of input signals ± 1000 mV
Frequency range 1-1000 kHz
Sampling rates 39, 312, 832, 2496 kHz
Built-in memory not less than 4000Mbytes
Data unloading channel Ethernet
Display LCD, monochrome, 320 x 240 pixels
Keypad 18 keys
GPS support YES
Volume of the built-in 12 V accumulator 5 А*hours
Voltage of power supply, V 11…15
Resource (on the built-in accumulator) not less than 8 h
Operation temperature range -20 … +50 °С
Dimensions 340 x 295 x155 mm
Weight 5 kg
Magnetic sensor:
Frequency range 1-1000 kHz
Transfer constant 20 mV/nT
Dimensions 32 mm (diameter) / 220 mm (length)
Weight 0.3 Kg
Voltage of external power supply 7-10 V
Current consumption 5 mA
Cable length 4 m
Frequency range 1-1000 kHz
Input resistance 2 MOhm
Voltage of external power supply 7-10 V
Cable length 4 m
GTS-1 transmitter:
Output voltage 1-288 V
Maximum output power 0.9 kW
Maximum output current 7.5 A
Standard source grounded electric dipole of various length
Signal type rectangular signal with mutable on/off ratio
Frequency range 0.1 Hz – 1000 kHz
Display LED, monochrome, 85x18 mm
Keypad 18 keys
Control type via keypad or external PC
Power supply 220 V, 50 Hz
Internal output voltage and current sensors +
Operation temperature range -10 … +50 °С
Dimensions 450x315x140 mm
Weight 11 kg
All year round
marin, land, borehole
1D, 2D, 3D, 4D