ELLISS-3 is a lightweight mobile system designed to carry out near-surface seismic refraction / reflection profiling, microseismogram logging, vertical seismic profiling, crosshole seismic testing, MASW and seismic microzonation. The station can be used to perform engineering and geophysical surveys in the water area using continuous seismoacoustic profiling (СSP), high-resolution (HR) or super-ultra-high-resolution / super-high-resolution (SUHR / SHR) seismic surveys.
The number of channels in station is determined by the Customer and can vary from 1 to 96. The built-in channel switch (option) allows not only to increase the productivity of operations, but also to achieve more uniform seismic data density, what is especially important for CDP and MASW methods. Also, the channel switch actually doubles the “channel capacity” of the station, what can also be used for seismic refraction operations in order to obtain longer hodographs or when performing seismic microzonation, wherein the operator can switch between vertical and horizontal channel seismic arrays.
Switching circuit of 96-channel array for 48-channel station with a switch
Switching circuit of 48-channel array for 24-channel station with a switch
In ELLISS-3 it is possible to perform full control of both the station itself and the connected cable system with seismic receivers. Shockproof construct, high-quality gold-plated connectors, low power consumption and low circuit noise ensure high performance and quality of the data. The station is compatible with any seismic sources such as “weight drop”, “sledgehammer”, “single-shot”, “Geoton”, “Yenisei”, etc.
Built-in electronic CDP / MASW switch (option)
Full control of seismic array
Low power consumption
Low circuit noise
Single shockproof construct
|Number of channels||1-96|
|Instantaneous dynamic range||120 dB|
|Gain||0; 12; 24; 36; 48 dB|
|Sampling period||0.0125; 0.05; 0.125; 0.25, 0.5; 1; 2; 4 ms|
|Maximum record length||8192 readings|
|Maximum signal amplitude at minimum gain||±2.5 V|
|Inherent noise level||0.1 µV|
|Nonlinear-distortions coefficient||0.001 %|
|Mutual influence of channels||130 dB|
|Common-mode rejection ratio||100 dB|
|Operating temperatures||-40 ÷ +70 °С|
|Line control interface weight||2.9 kg (48ch)|
|Line control interface dimensions||340х295х152 mm|
Are designed to provide functioning of sparkers of different types
Are designed for induction of high-frequency seismic pulses during seismic surveys on water areas (FWS/SWS)
Sparker source Pulse is used to excite pressure (P) waves in water-filled wells during crosshole seismic testing (CST) and vertical seismic profiling (VSP). The operation of the Pulse source is provided by the power supply Jack.
The borehole source SHock is utilized to generate pressure (P-) and shear waves of horizontal polarization (SH-waves) in wells while performing the operations through crosshole seismic testing (CST) and reverse vertical seismic profiling (RVSP) methods. The power supply Jack is used as the source of energy.
High energy of pulse
Ideal repetition of impacts
Hammers of different weights